Quantcast
Channel: Intel Communities: Message List
Viewing all 30744 articles
Browse latest View live
↧

Re: NUC5i5RBY wont boot

December 10, 2017, 4:14 pm
$
0
0

Ok, I have exhausted all of the normal diagnosis steps for this kind of issue. Something must have failed on the board. If you are still under warranty (check here: Determine if Your Product Is Still Under Warranty), I suggest that you contact Intel Customer Support directly and arrange for the unit to be replaced via RMA. Here is contact information, by geography:

 

Intel Customer Support Contact Information for US and Canada

Intel Customer Support Contact Information for Europe, Middle East and Africa

Intel Customer Support Contact Information for Asia-Pacific

Intel Customer Support Contact Information for Latin America

 

You can also use their chat service (here: Intel Customer Support Chat Service), but this is English-only and subject to office hours for the PST timezone.

...S

 

 

↧
Search

Re: Display issues NUC7i5BNH on Panasonic TV (HDMI)

December 10, 2017, 4:20 pm
$
0
0

Ok, it sounds like whatever driver is being downloaded by Windows Update is causing the issue (and my gut says it is something related to refresh rate). Reinstall using the latest version on Intel's Web page for this NUC (here: Downloads for Intel® NUC Kit NUC7i5BNH) and configure Windows 10 to not update drivers automatically.

 

Hope this helps,

...S

 

P.S. Just a thought: Have you tried using a secondary HDMI port on the TV?

↧
↧

Boot to optane drive?

December 10, 2017, 4:23 pm
$
0
0

I have a dell that can take an optane M.2 board and that works fine either as enabled optane memory speeding up main drive access, or disabled in that mode and just formated as a D: drive. I would like to  do a clean windows install to the optane drive. When I remove the SATA drive and boot a windows install stick it say sit can't find any drive to install windows on. Why not?

↧

Re: Display Driver 20.19.15.4835 Pushed by Windows Update

December 10, 2017, 4:48 pm
$
0
0

Yea, you aren't finding the release because the version number you are seeing is the raw driver version number, not the version number for the driver installation package. The driver installation package contains two drivers (Intel HD Graphics and Intel HD Audio) and, as a result, the version number for the package is maintained separately from the version numbers for the individual drivers.

 

As for why Microsoft is changing the rules, what can I say? This is the company that upgraded folks PCs to Windows 10 without their permission and who are now refusing to support these PCs if anything goes wrong - and denying them their license if they upgrade their hardware...

 

...S

↧

Re: Its maybe a stupid question about I-RST

December 10, 2017, 4:54 pm
$
0
0

Recently you used RST how? What have you done?

↧
↧

Related to B75 and Z77 chipset driver version

December 10, 2017, 10:32 pm
$
0
0

Questions related to B75, Z77 board using Intel 7 series chipset.

 

What version of the IRST driver is compatible with Windows 10?

 

I understand that the 15.x version is up-to-date and I know there is a compatibility issue.

 

I know that version 12.9 is stable and not compatible with Windows 10.

 

Which version should I use?

 

And what version of the ME firmware should I use?

 

I am aware that the latest version of ME firmware is 8.1.70.1590.(for 7-series chipset)

 

https://www.win-raid.com/t596f39-Intel-Management-Engine-Drivers-Firmware-amp-System-Tools.html

↧

Re: Aero RTF - Flight controller stops working

December 10, 2017, 10:41 pm
$
0
0

Hi

I installed ubuntu and all the other programs (python, mavproxy, ...) and flash the FPGA and the arducopter.px4.

Only after I inserted the command: "sudo apt-get autoremove modemmanager" - the FCU back to life.

 

Thanks,

Doron Fine

 

 

↧

Re: Reset the Flight controller of aero RTF

December 10, 2017, 10:45 pm
$
0
0

Hi Jesus,

I think that the reboot command was not implemented in ArduCopter.

I also cannot reboot/reset the FCU when runs in SITL mode...

Is there another way to do this (turn off power for the FCU for example) ?

 

thanks anyway,

Doron Fine

↧
Search

exception in mraa

December 10, 2017, 11:07 pm
$
0
0

Dear community members,

 

I am playing around Intel Edison's GPIO with mraa using Java, and got an exception shown below when I executed the sample code (BlinkIO.java):

 

Exception in thread "main" java.lang.UnsatisfiedLinkError: mraa.mraaJNI.ERROR_PLATFORM_ALREADY_INITIALISED_get()I

        at mraa.mraaJNI.ERROR_PLATFORM_ALREADY_INITIALISED_get(Native Method)

        at mraa.Result.<clinit>(Result.java:24)

        at mraa.Gpio.dir(Gpio.java:67)

        at BlinkIO.main(BlinkIO.java:58)

 

I searched this exception name, but I got no further information about the details of the exception description

"Exception in thread "main" java.lang.UnsatisfiedLinkError: mraa.mraaJNI.ERROR_PLATFORM_ALREADY_INITIALISED_get()I".

 

Could anybody tell me what this exception means?

 

Best regards,

↧
↧

Re: SR300 depth and IR are not working

December 10, 2017, 11:13 pm
$
0
0

Laptops processors are usually not upgradable because the manufacturer fixes the processor the the circuit board (called the 'motherboard')  with permanent solder instead of having the chip plugged into a socket like on desktop machines.  Also, the motherboard usually has to have in-built compatibility with the chip replacement, so even if you could insert a new chip, it  would not work with the PC motherboard.

 

If you were considering an X-series processor and DDR memory, it would probably be cheaper just to get a laptop with a 6th generation processor (the minimum for the SR300 camera).  As 6th generation Skylake is approaching a few years old now, you may be able to pick up a good deal somewhere on a Skylake laptop.  I myself use an Acer Aspire ES 15 laptop with Skylake processor as my main work machine.

↧

rs300 not working

December 10, 2017, 11:32 pm
$
0
0

I have a hp laptop Capture1.PNG

with RS300 build in, the depth camera not working and  when I'm trying to install the DCM I'm getting this screen  Capture.PNG

no option to modify or repair.

how to solve this problem?

↧

Re: NUC7i3BNK screen flickering (1680x1050, 59 or 60hz)

December 10, 2017, 11:38 pm
$
0
0

The only two available options are 59Hz and 60Hz and with both the problem occurs. I believe 59 or 60 are quite common refresh rates so that seems to be OK?

↧

Re: Reset adapter unexpectedly

December 10, 2017, 8:00 pm
$
0
0

Hello Sharon

 

I already have the most latest version.  I installed it off of arches community archives last night and the problem just continues.  If anything it has gotten work.

 

 

 

[356760.653370] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[356762.652817] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly

[356766.409364] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

[357338.693255] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[357340.693435] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[357342.692630] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly

[357346.438995] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

[364073.158078] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[364075.158204] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[364077.157660] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly

[364080.934026] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

[364129.161977] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[364131.162089] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[364132.121449] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly

[364135.867908] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

[364784.167554] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[364786.167712] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[364787.207064] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly

[364790.993461] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

[366043.294974] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[366045.295159] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[366047.295262] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[366049.295403] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[366051.294626] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly

[366055.071031] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

[366091.298158] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[366093.298308] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[366095.297662] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly

[366099.044025] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

[366161.302952] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[366163.303114] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[366164.262397] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly

[366167.988803] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

[367240.337699] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[367242.337834] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[367244.337340] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly

[367248.123573] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

[367616.363905] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[367618.364061] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:

[367620.363221] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly

[367624.129487] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:

 

 

[www3 ~]# modinfo e1000e

filename:       /lib/modules/4.9.67-1-lts/updates/e1000e.ko

version:        3.3.6-NAPI

license:        GPL

description:    Intel(R) PRO/1000 Network Driver

author:         Intel Corporation, <linux.nics@intel.com>

srcversion:     6453212B70344504D53DE09

 

 

There are OPTIONS that I can use on the module.  That is where I need adivice.  Are you an employee of Intel or an AI?

 

Ruben

↧
↧

Re: rs300 not working

December 10, 2017, 11:43 pm
$
0
0

If your camera was working up until now and then suddenly stopped, it suggests that something has updated in Windows that affected the camera.

 

I would usually recommend downloading the camera drivers from the support website of your computer's manufacturer, in case the manufacturer has tweaked the configuration to work with their own machine specifically.  If the camera was working and then stopped though, I would suspect Windows as the cause rather than the RealSense drivers.

 

Can you tell me the version of Windows on your machine please?  It should be the second line down, 'Version', on the System Information window.  Thanks!

↧

When are the new depth camera's to be released ?

December 10, 2017, 11:47 pm
$
0
0

We are a robotics company, and for some kind of unknown reason all depth camera vendors seam to aboard their production.
Which amazes me a lot, its the time of robotics, and one requires something better then the kinect one these days.
But most online depth camera's are not even near kinect 360, so maybe some of the forum members here can recomend us a a HD TOF camera from some vendor.

↧
Search

Re: Save fixed_frame of Euclid

December 11, 2017, 2:41 am
$
0
0

Hi George,

 

I think you'd need to write specific code for this. If you are running the slam rosnode for Euclid, you should be able to save data from the /tf topic, and I think it will give you the position that you were looking for.

 

Meitav

Intel Euclid Development Team

↧

Something wrong with Intel Dynamic Platform & Thermal Framework

December 11, 2017, 2:47 am
$
0
0

I've been having some issues with Intel Dynamic Platform & Thermal Framework drivers. I have already described a part of my problem here however I have now discovered more issues that are directly linked to Intel DPTF.

 

Whenever I boot up my computer I get the following event report under System:

 

Log Name:      System

Source:        Microsoft-Windows-Kernel-PnP

Date:          11-Dec-17 10:52:48

Event ID:      219

Task Category: (212)

Level:         Warning

Keywords:     

User:          SYSTEM

Computer:      DESKTOP-KSLV7OU

Description:

The driver \Driver\WUDFRd failed to load for the device ACPI\INT3400\2&daba3ff&1.

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />

    <EventID>219</EventID>

    <Version>0</Version>

    <Level>3</Level>

    <Task>212</Task>

    <Opcode>0</Opcode>

    <Keywords>0x8000000000000000</Keywords>

    <TimeCreated SystemTime="2017-12-11T09:52:48.690402000Z" />

    <EventRecordID>35032</EventRecordID>

    <Correlation />

    <Execution ProcessID="4" ThreadID="336" />

    <Channel>System</Channel>

    <Computer>DESKTOP-KSLV7OU</Computer>

    <Security UserID="S-1-5-18" />

  </System>

  <EventData>

    <Data Name="DriverNameLength">24</Data>

    <Data Name="DriverName">ACPI\INT3400\2&amp;daba3ff&amp;1</Data>

    <Data Name="Status">3221226341</Data>

    <Data Name="FailureNameLength">14</Data>

    <Data Name="FailureName">\Driver\WUDFRd</Data>

    <Data Name="Version">0</Data>

  </EventData>

</Event>

 

I have checked ACPI\INT3400\2&daba3ff&1 in the Device Manager and found it under Intel Dynamic Platform & Thermal Framework Manager. This event appears once shortly after the computer boots up.

 

I have also been getting the following warnings under Application log which seem to be related to Intel DPTF services. These events happen ever 10-30 minutes.

 

Log Name:      Application

Source:        DptfPolicyLpmService

Date:          11-Dec-17 10:52:58

Event ID:      1

Task Category: None

Level:         Error

Keywords:      Classic

User:          N/A

Computer:      DESKTOP-KSLV7OU

Description:

The description for Event ID 1 from source DptfPolicyLpmService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

 

 

If the event originated on another computer, the display information had to be saved with the event.

 

 

The following information was included with the event:

 

 

DptfPolicyLpmService

ConnectToDptfFrameworkDriver:  SetupDiEnumDeviceInterfaces() failed.

Last error = [0x00000103]

 

 

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="DptfPolicyLpmService" />

    <EventID Qualifiers="49154">1</EventID>

    <Level>2</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2017-12-11T09:52:58.278944800Z" />

    <EventRecordID>2203</EventRecordID>

    <Channel>Application</Channel>

    <Computer>DESKTOP-KSLV7OU</Computer>

    <Security />

  </System>

  <EventData>

    <Data>DptfPolicyLpmService</Data>

    <Data>ConnectToDptfFrameworkDriver:  SetupDiEnumDeviceInterfaces() failed.</Data>

    <Data>Last error = [0x00000103]</Data>

  </EventData>

</Event>

Log Name:      Application

Source:        DptfPolicyLpmService

Date:          11-Dec-17 10:52:58

Event ID:      1

Task Category: None

Level:         Error

Keywords:      Classic

User:          N/A

Computer:      DESKTOP-KSLV7OU

Description:

The description for Event ID 1 from source DptfPolicyLpmService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

 

 

If the event originated on another computer, the display information had to be saved with the event.

 

 

The following information was included with the event:

 

 

DptfPolicyLpmService

ServiceStart:  ConnectToDptfFrameworkDriver() failed.

 

 

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="DptfPolicyLpmService" />

    <EventID Qualifiers="49154">1</EventID>

    <Level>2</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2017-12-11T09:52:58.694258300Z" />

    <EventRecordID>2210</EventRecordID>

    <Channel>Application</Channel>

    <Computer>DESKTOP-KSLV7OU</Computer>

    <Security />

  </System>

  <EventData>

    <Data>DptfPolicyLpmService</Data>

    <Data>ServiceStart:  ConnectToDptfFrameworkDriver() failed.</Data>

  </EventData>

</Event>

Log Name:      Application

Source:        DptfPolicyCriticalService

Date:          11-Dec-17 10:52:58

Event ID:      1

Task Category: None

Level:         Error

Keywords:      Classic

User:          N/A

Computer:      DESKTOP-KSLV7OU

Description:

The description for Event ID 1 from source DptfPolicyCriticalService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

 

 

If the event originated on another computer, the display information had to be saved with the event.

 

 

The following information was included with the event:

 

 

DptfPolicyCriticalService

ConnectToDptfFrameworkDriver:  SetupDiEnumDeviceInterfaces() failed.

Last error = [0x00000103]

 

 

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="DptfPolicyCriticalService" />

    <EventID Qualifiers="49154">1</EventID>

    <Level>2</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2017-12-11T09:52:58.278944800Z" />

    <EventRecordID>2204</EventRecordID>

    <Channel>Application</Channel>

    <Computer>DESKTOP-KSLV7OU</Computer>

    <Security />

  </System>

  <EventData>

    <Data>DptfPolicyCriticalService</Data>

    <Data>ConnectToDptfFrameworkDriver:  SetupDiEnumDeviceInterfaces() failed.</Data>

    <Data>Last error = [0x00000103]</Data>

  </EventData>

</Event>

Log Name:      Application

Source:        DptfPolicyCriticalService

Date:          11-Dec-17 10:52:58

Event ID:      1

Task Category: None

Level:         Error

Keywords:      Classic

User:          N/A

Computer:      DESKTOP-KSLV7OU

Description:

The description for Event ID 1 from source DptfPolicyCriticalService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

 

 

If the event originated on another computer, the display information had to be saved with the event.

 

 

The following information was included with the event:

 

 

DptfPolicyCriticalService

ServiceStart:  ConnectToDptfFrameworkDriver() failed.

 

 

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="DptfPolicyCriticalService" />

    <EventID Qualifiers="49154">1</EventID>

    <Level>2</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2017-12-11T09:52:58.694258300Z" />

    <EventRecordID>2208</EventRecordID>

    <Channel>Application</Channel>

    <Computer>DESKTOP-KSLV7OU</Computer>

    <Security />

  </System>

  <EventData>

    <Data>DptfPolicyCriticalService</Data>

    <Data>ServiceStart:  ConnectToDptfFrameworkDriver() failed.</Data>

  </EventData>

</Event>

Log Name:      Application

Source:        DptfPolicyCriticalService

Date:          11-Dec-17 10:31:29

Event ID:      1

Task Category: None

Level:         Error

Keywords:      Classic

User:          N/A

Computer:      DESKTOP-KSLV7OU

Description:

The description for Event ID 1 from source DptfPolicyCriticalService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

 

 

If the event originated on another computer, the display information had to be saved with the event.

 

 

The following information was included with the event:

 

 

DptfPolicyCriticalService

ServiceMain:  ServiceStart() failed.

 

 

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="DptfPolicyCriticalService" />

    <EventID Qualifiers="49154">1</EventID>

    <Level>2</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2017-12-11T09:31:29.341033500Z" />

    <EventRecordID>2078</EventRecordID>

    <Channel>Application</Channel>

    <Computer>DESKTOP-KSLV7OU</Computer>

    <Security />

  </System>

  <EventData>

    <Data>DptfPolicyCriticalService</Data>

    <Data>ServiceMain:  ServiceStart() failed.</Data>

  </EventData>

</Event>

Log Name:      Application

Source:        DptfPolicyConfigTDPService

Date:          11-Dec-17 10:52:58

Event ID:      1

Task Category: None

Level:         Error

Keywords:      Classic

User:          N/A

Computer:      DESKTOP-KSLV7OU

Description:

The description for Event ID 1 from source DptfPolicyConfigTDPService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

 

 

If the event originated on another computer, the display information had to be saved with the event.

 

 

The following information was included with the event:

 

 

DptfPolicyConfigTDPService

ConnectToDptfFrameworkDriver:  SetupDiEnumDeviceInterfaces() failed.

Last error = [0x00000103]

 

 

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="DptfPolicyConfigTDPService" />

    <EventID Qualifiers="49154">1</EventID>

    <Level>2</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2017-12-11T09:52:58.278944800Z" />

    <EventRecordID>2205</EventRecordID>

    <Channel>Application</Channel>

    <Computer>DESKTOP-KSLV7OU</Computer>

    <Security />

  </System>

  <EventData>

    <Data>DptfPolicyConfigTDPService</Data>

    <Data>ConnectToDptfFrameworkDriver:  SetupDiEnumDeviceInterfaces() failed.</Data>

    <Data>Last error = [0x00000103]</Data>

  </EventData>

</Event>

Log Name:      Application

Source:        DptfPolicyConfigTDPService

Date:          11-Dec-17 10:52:58

Event ID:      1

Task Category: None

Level:         Error

Keywords:      Classic

User:          N/A

Computer:      DESKTOP-KSLV7OU

Description:

The description for Event ID 1 from source DptfPolicyConfigTDPService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

 

 

If the event originated on another computer, the display information had to be saved with the event.

 

 

The following information was included with the event:

 

 

DptfPolicyConfigTDPService

ServiceStart:  ConnectToDptfFrameworkDriver() failed.

 

 

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="DptfPolicyConfigTDPService" />

    <EventID Qualifiers="49154">1</EventID>

    <Level>2</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2017-12-11T09:52:58.694258300Z" />

    <EventRecordID>2209</EventRecordID>

    <Channel>Application</Channel>

    <Computer>DESKTOP-KSLV7OU</Computer>

    <Security />

  </System>

  <EventData>

    <Data>DptfPolicyConfigTDPService</Data>

    <Data>ServiceStart:  ConnectToDptfFrameworkDriver() failed.</Data>

  </EventData>

</Event>

Log Name:      Application

Source:        DptfPolicyConfigTDPService

Date:          11-Dec-17 10:31:29

Event ID:      1

Task Category: None

Level:         Error

Keywords:      Classic

User:          N/A

Computer:      DESKTOP-KSLV7OU

Description:

The description for Event ID 1 from source DptfPolicyConfigTDPService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

 

 

If the event originated on another computer, the display information had to be saved with the event.

 

 

The following information was included with the event:

 

 

DptfPolicyConfigTDPService

ServiceMain:  ServiceStart() failed.

 

 

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="DptfPolicyConfigTDPService" />

    <EventID Qualifiers="49154">1</EventID>

    <Level>2</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2017-12-11T09:31:29.341033500Z" />

    <EventRecordID>2077</EventRecordID>

    <Channel>Application</Channel>

    <Computer>DESKTOP-KSLV7OU</Computer>

    <Security />

  </System>

  <EventData>

    <Data>DptfPolicyConfigTDPService</Data>

    <Data>ServiceMain:  ServiceStart() failed.</Data>

  </EventData>

</Event>

Log Name:      Application

Source:        DptfPolicyLpmServiceHelper

Date:          11-Dec-17 10:53:28

Event ID:      1

Task Category: None

Level:         Error

Keywords:      Classic

User:          N/A

Computer:      DESKTOP-KSLV7OU

Description:

The description for Event ID 1 from source DptfPolicyLpmServiceHelper cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event:

DptfPolicyLpmServiceHelper

WinMain:  CreateSharedMemory() failed.

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="DptfPolicyLpmServiceHelper" />

    <EventID Qualifiers="49154">1</EventID>

    <Level>2</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2017-12-11T09:53:28.987067900Z" />

    <EventRecordID>2239</EventRecordID>

    <Channel>Application</Channel>

    <Computer>DESKTOP-KSLV7OU</Computer>

    <Security />

  </System>

  <EventData>

    <Data>DptfPolicyLpmServiceHelper</Data>

    <Data>WinMain:  CreateSharedMemory() failed.</Data>

  </EventData>

</Event>

Log Name:      Application

Source:        DptfPolicyLpmServiceHelper

Date:          09-Dec-17 20:00:23

Event ID:      1

Task Category: None

Level:         Error

Keywords:      Classic

User:          N/A

Computer:      DESKTOP-KSLV7OU

Description:

The description for Event ID 1 from source DptfPolicyLpmServiceHelper cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

 

 

If the event originated on another computer, the display information had to be saved with the event.

 

 

The following information was included with the event:

 

 

DptfPolicyLpmServiceHelper

CreateSharedMemory:  CreateFileMapping() failed.

Last error = [0x00000005]

 

 

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="DptfPolicyLpmServiceHelper" />

    <EventID Qualifiers="49154">1</EventID>

    <Level>2</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2017-12-09T19:00:23.206150400Z" />

    <EventRecordID>216</EventRecordID>

    <Channel>Application</Channel>

    <Computer>DESKTOP-KSLV7OU</Computer>

    <Security />

  </System>

  <EventData>

    <Data>DptfPolicyLpmServiceHelper</Data>

    <Data>CreateSharedMemory:  CreateFileMapping() failed.</Data>

    <Data>Last error = [0x00000005]</Data>

  </EventData>

</Event>

 

If I try to manually start any of these three services I get the following message:

 

dt.jpg

 

I have the latest Intel DPTF 8.2.11003.3588 driver installed which I downloaded from HP.

 

Any help on how to fix this issue is appreciated.

 

↧
↧

s1200sps + supermicro sc825tq-r720lpb tracking power failures

December 11, 2017, 2:51 am
$
0
0

intel s1200sps mainboard has the i2c ( SSI compliant 1x5 pin connector J9F1 to provide I2C monitoring of the power supply. https://www.intel.com/content/dam/support/us/en/documents/server-products/S1200SP_TPS_R1_1_S1200SPL_S1200SPS_S1200SPO.pdf) connector to track failures from psu on intel's own supported cases.

Has anyone managed to get supermicro's PDU (for example PWS-721P-1R) information of power failures?

 

When I test to plug out power cable I get OK readings from intel's bmc:

Name   Ascending  Status   Ascending  Health   Ascending  Reading   Ascending
Pwr Unit StatusAll deassertedOK0x0000

Br, Max

↧

Re: Save fixed_frame of Euclid

December 11, 2017, 3:22 am
$
0
0

Hi Meitav,

 

Thanks for taking the time. I think everything's clear now.

 

Greetings.

↧

Wireless disconnections with Dual Band 7260 + 802.11n network

December 11, 2017, 3:22 am
$
0
0

Hello,

 

I have big issues with my wireless connection and I found this support forum with very similar problem described, so maybe you can help me. Especially in this topic : Intel dual band 7260AC for desktop hangs on Windows 10 creator edition with IPv6 enabled

 

I have the same symptoms : frequent wifi disconnections despite an up to date configuration with Intel Dual Band 7260 and a network on 802.11n. I had sometimes same kind of problems before but not frequently and in some specific conditions (long time connect, after PC falling asleep...). Since the last Windows update it became systematic to be disconnect after 5-10 minutes. The restart of wireless card through "windows solving internet issue" work each time but it is'nt viable naturally to do that every 5 minutes. I also tried to disable ipv6 but it doesn't change anything.

 

You could find attached the detailed system report. Feel free to ask more details if you need.

 

Thank for your help.

 

PS : Sorry for my english, I'm french native speaker.

↧
Viewing all 30744 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>